Shenzhen J.X.K Electronics Technology Co., Ltd.
|
Payment Terms: | T/T,WU |
Special Groups: |
12V car parking sensor system (56)
|
Place of Origin: | Guangdong, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
JXK-606D
Car parking sensor system
8 sensor probes BIBIBI...buzzer alarm speaker parking sensor system
Details of JXK 606D
8 sensor probes (diameter:22 mm / the lenth of the line:250mm)
1 mian part box built-in dual cpu for accurate working
1 bibibi buzzer for alarm voice sound
1 power line
1 3M for buzzer fix
1 3M for main part box fix
1 drilling bit for sensor probes installation
drivers always collide when they are parking,especially new drivers.because they can not see bodies near behind their car.at this time ,they need parking sensor system:bibibi buzzer alarm parking sensor system JXK-606D
first you need to choose 4 position for the sensor probes(about 55-70cm height from ground)
drill 4 holes on your car bumper with the drilling bit
second,in the same way,you must choose 4 position for the 4 sensor probes in the front of your car.
take the 4 sensor probes into these 4 holes and connect their lines with the ports on the main part box inside your car,and take another 4 sensor probes plug into the other 4 ports of the main part box
then take the plug of the bibibi buzzer into the port on the main part box
the same,choose a best position for the buzzer to fix it in your car with the 3M
at last,take the power line plug into the main part box ,and connect the red line with the positive pole of back-up lamp of your car,connect the orange line with the positive pole of car's brake lamp,connect the white line with ACC of your car,and make the black line ground connection
so it's all for installation of all parts
when you take reverse gear,the buzzer parking sensor system would be woke.these 4 sensor probes will sense all bodies back of your car.and will sound alarm voice when the bodies are between 0.3-1.5m far from your car back.you can control car's brake at the right time.
when you take out of teverse gear stautus or take into brake status,the front 4 sensor probes would work for you in the same way
all is keep you safe.
JXK-606D's Specification | |
Product Name | car Bibi buzz parking sensor system |
Type | security product for drivers |
Material | plastic |
Use | 12V car use |
support | car taxi |
probe number | 8 (front 4 ,back 4) |
Rated voltage | 12V |
Rated current | 10mA ~ 150mA |
Detection distance | 0.3 ~ 1.5m for rear |
Ultrasonic frequency | 40KHz |
Working temperature | -30ºC ~ +80ºC |
Warning | 80dB |
Display form | NO |
Alarm form | bi bi bi…from buzzer |
personerly OEM service |
diameter of sensor probes | 22 mm |
lenth of the sensor probes | 250 mm |
all parts of 8 sensor probes bibibi buzzer alarm parking sensor system JXK 606D
size of main part box of 8 sensor probes bibibi buzzer alarm parking sensor system JXK 606D
size of buzzer of 8 sensor probes bibibi buzzer alarm parking sensor system JXK 606D
drilling bit of 8 sensor probes bibibi buzzer alarm parking sensor system JXK 606D
sensor probes of 8 sensor probes bibibi buzzer alarm parking sensor system JXK 606D